You have a 3.6kW inverter in mind. Should you keep the 24V battery bank you already own, or start with 48V? The answer depends on the battery you can use, the loads you expect to run and how much room you have for expansion.
SUKFLOW lists 24V and 48V versions on its 3.6kW hybrid inverter product page. Choosing between them starts on the DC side, where the battery bank supplies the inverter. Here is how to compare the two options for a retrofit or a new solar backup system.
If you already own a 24V battery bank, check its voltage range, discharge capability and compatibility with the 24V model. For a new system, compare both options against the same load and runtime goals. A 48V design draws less DC current for the same power.
Why battery voltage changes current
Current is power divided by voltage. At an illustrative 3,600W of DC power, a nominal 24V battery would supply 150A, while a nominal 48V battery would supply 75A.
| Battery bank | Illustrative current |
|---|---|
| 24V nominal | 3,600W ÷ 24V = 150A |
| 48V nominal | 3,600W ÷ 48V = 75A |
These figures isolate the effect of voltage. If an inverter is delivering 3,600W of AC output from the battery, it needs additional DC power to cover conversion losses. Current also rises as battery voltage falls at a fixed power level. Actual current depends on the load, operating voltage and inverter efficiency.
Lower current can reduce voltage drop and heating for a given cable and length. It also changes what the battery management system (BMS), cables and protection devices need to handle. Have the installer size those components using the exact inverter manual, the battery specifications and local requirements.
Compare battery energy in watt-hours
Use watt-hours (Wh) or kilowatt-hours (kWh) to compare how much energy different battery banks store. For an illustrative calculation, multiply nominal voltage by amp-hours. A 24V, 100Ah bank and a 48V, 50Ah bank both calculate to 2,400Wh at their stated nominal voltages. For an actual battery, start with its published Wh or kWh rating.
Two banks with similar energy ratings can still support different loads. For runtime, check usable battery energy, load and conversion losses. For high loads or motor startup, check the bank’s continuous and short-duration discharge limits. A battery can have enough energy for several hours of light use and still reach its current limit when a large appliance starts.
Choose for your installation
| Your situation | What to check first |
|---|---|
| Reuse a 24V bank | Compare the full battery operating range, discharge limits and required BMS communication with the 24V inverter. Check whether the existing bank still meets your load and runtime goals. |
| Build from scratch | Compare compatible battery options at the same usable energy. Include DC cables, protection, installation and any existing DC loads in the system cost. Consider 48V where battery current is an important constraint. |
| Plan for expansion | Work out whether you will need more backup hours or more simultaneous AC power. Check the approved battery expansion options for longer runtime, and check the inverter’s output limits before adding larger loads. |
Check the exact SUKFLOW model
The SUKFLOW 3.6kW hybrid inverter listing offers two model options, SUK-3.6KW-24V-US and SUK-3.6KW-48V-US. The detailed 48V specification lists a 41–58V battery operating range and a 120–450V DC PV MPPT range. Those figures describe two separate inputs on the 48V version. Request the matching specification sheet for the 24V option when checking its battery and PV inputs.
What to confirm before you order
- Battery fit. Confirm the operating voltage range, battery chemistry and compatible BMS communication where required.
- Charge and discharge limits. Check the battery bank’s current ratings against the planned load, startup demand and charging settings.
- AC and solar inputs. Confirm the exact model’s AC input and output ratings for your installation. Ask your installer to check the array voltage, including cold-weather open-circuit voltage, and other PV input limits.
- Protection and expansion. Ask your installer to check cable length, DC protection and any supported battery expansion before the system is installed.
Check your battery and inverter match
Share your battery model, the inverter version you’re considering, and the loads you want to run. The SUKFLOW team can help you identify the matching product information for your installer to review.
Explore the 3.6kW Inverter Ask About CompatibilityFor help estimating the inverter output, battery energy and solar input you will need, read How to Size an Off-Grid Solar System.
For more technical background on DC current and voltage drop, see Victron Energy’s Wiring Unlimited guide.